The solution to loose metal shank button

The shape design of metal shank button is different from pure art design such as engraving, sculpture, painting, etc. It includes shape, pattern, color, material, practicality, durability, producibility and craftsmanship of mass industrial production. So, how to solve the loose metal shank button?

Preparation materials: hammer, conical iron rod or Phillips screwdriver, scissors, metal shank button is loose. The specific repair methods are as follows:
1. Prepare a complete set of rivet copper buttons. The buttons have two pieces, one mortise and one tenon, and each piece is riveted by two small accessories.
2. Select the position of the lower rivet, it is best to make a mark, the metal shank button manufacturer tells you that if you want to see the rivet from the outside, you need to cut the suture of the inner tank and install it from the inside.
3. After cutting a small hole with arrow scissors, put on the rivet pieces with hollow pointed ends, and then put on the complete set of accessories.
4. It is best to have a tapered iron rod, if not, use a Phillips screwdriver instead.
5. Insert a Phillips screwdriver into the hollow pointed tube, and hit the screwdriver with a hammer, so that the force on the screwdriver is transmitted to the hollow pointed tube, so that it can open and seal the rivet on the opposite side.
6. It can be seen that there are only 2 left and right metal pieces, and the upper and lower 2 pieces have not been completely cracked. Then use a screwdriver to manually handle it so that it has 4 metal petals to bear the force.
7. The next step is to use the same method. The metal shank button manufacturer tells you to install the opposite rivet in place. Pay attention to find the location to be installed first.